透水坡面降雨径流过程的运动波近似解析解

本文从坡面流运动波理论的基本方程出发，利用运动波特征线法和分级叠加法，推导出了实验条件下考虑净雨强随时间变化的坡面流运动波方程近似解析解。用实验实测资料对模拟计算结果进行了验证。结果表明，坡面漫流过程的模拟计算结果与实测资料符合良好。     

一种二元域上的快速计算哈希函数

论文从映射的角度,将哈希函数分为三类:严格哈希函数、计算哈希函数和实用哈希函数。在此基础上,根据二元域上二次方程x2 x c=0的部分不可解的性质,构造了一种计算哈希函数,它满足单向性和一一对应性,同时具有运算速度快的优点。     

分析介质光波导传播特性的Cole—Hopf变换法

采用Cole-Hopf变换法，将平板光波导导模所满足的二阶常微分方程（Helmholtz方程）变换成一阶常微分方程（Riccati方程），用较简单且有效的方法分析导模的特性。给出了多层阶跃型及渐变型平板波导导模的精确解析解和数值解法及实例；给出了非线性平板波导传播特性的数值计算法及实例。     

卷积码的线性系统

介绍了卷积码的线性离散时不变系统模型。从建立卷积码的状态变量方程出发,研究了卷积码的代数结构,并详细论述了基于状态变量方程描述的迭代译码算法。     

环形掺Er3+光纤激光器输出特性分析与实验研究

理论分析了掺Er^3＋光纤环形腔激光器的输出特性，获得了稳态条件下激光器输出功率、阔值泵浦功率和斜率效率的解析表达式．分析了泵浦光波长、泵浦功率、Er^3＋光纤掺杂浓度、输出端耦合器分光比等的影响，推导了在特定输出波长处获得最大输出功率所需最佳掺Er^3＋光纤长度的解析表达式。进行了LD泵浦掺Er^3＋光纤环形腔激光器的实验工作，获得了斜率效率10％以上的激光输出。     

A note on the Gauss-Jacobi quadrature formulae for singular integral equations of the second kind

A fast and efficient numerical method based on the Gauss-Jacobi quadrature is described that is suitable for solving Fredholm singular integral equations of the second kind that are frequently encountered in fracture and contact mechanics. Here we concentrate on the case when the unknown function is singular at both ends of the interval. Quadrature formulae involve fixed nodal points and provide exact results for polynomials of degree 2n − 1, where n is the number of nodes. Finally, an application of the method to a plane problem involving complete contact is presented.     

声光效应拉曼-内斯方程矩阵级数解法及声光调制器优化设计

提出一种求解正常声光相互作用拉曼 内斯 (Raman Nath)方程的矩阵级数解法 ,该解法直观方便且具有普遍性。计算结果表明 ,对Q =4 1π ,Bragg衍射的效率只有 97 5 % ;对非对称入射 ,以往的Raman Nath近似解误差较大 ;指出提高Bragg衍射效率的有效途径在于提高声光频率比并给出计算声光器件最优长度的计算公式。     

连续梁的简便计算

利用三转角方程，对连续梁的内力进行精确的计算，该方法简捷明了，便于应用。     

用核磁共振测井确定渗透率的原理和方法分析

对常规测井和核磁共振测井的渗透率公式进行了比较 ,发现各渗透率公式存在相互联系。几种核磁共振测井渗透率公式的计算结果和实验室渗透率的对比表明核磁共振参数和渗透率有很好的相关性 ;改进的渗透率公式可以准确地求取岩心和地层的渗透率。     

CRITERIA FOR THE QUALITY ASSESSMENT OF CONSTITUTIVE EQUATIONS DEDICATED TO CUTTING MODELS

Determination of the flow stress under metal cutting conditions is difficult because high values of strains, strain rates and temperature exist in practical machining operations. Conventional tests for determining flow stress data cannot duplicate these deformation conditions and therefore, extrapolation will be required. In this study we have investigated critical issues regarding the constitutive equation determination by direct methods such as split Hopkinson's pressure bar bench (SHPB) tests. Quantitative analysis about the suitability of an experimentally determined constitutive equation for different purpose modeling is provided, leading to guidelines for the quality improvement of constitutive law dedicated to cutting, from the points of view of formulation and identification sequence.